Mercedes brake pads use sensors to stop your car in an emergency. When you apply the brakes, the sensors activate and send a signal to the engine control module (ECM).
The ECM then adjusts fuel or airflow to the brakes which stop or slows your car. If your vehicle has an electronic stability program (ESP), it will also adjust braking force accordingly as well.
If you get a warning light on your dashboard, there may be something wrong with one of the sensor modules located on either side of your disc brakes system.
Usually, replacing just one sensor is enough to fix this problem- but if not, take your car to a service center for further diagnosis and repair work.
In some rare cases where both sides of the brake pad are malfunctioning, replacement of both modules may be necessary
Contents
How Do Mercedes Brake Pad Sensors Work
If you’re having trouble breaking in your Mercedes, it may be because one or more of the brake pad sensors are malfunctioning.
These small devices detect when you apply the brakes and send a signal to the car’s computer. If one of these sensors isn’t working correctly, your car might not be able to stop as quickly or as smoothly as it should.
Let’s take a look at these key points that says how the Mercedes brake pad sensors work:
Eliminate Tab by Using a Small Sensor
When the brake pedal is pressed, small sensors located near the pads sense the motion and send a signal to the control module.
The goal is to disable any tabs that may be preventing proper contact between pad and rotor or disc so that you can continue braking without issue.
Low Current Passing
The sensor circuitry needs very little current in order to work properly; this means it’s less likely to become damaged as a result of corrosion or electrical interference from other components in your vehicle.
Make Contacts with the Rotor or Disc
The sensor must make physical contact with either the rotor or disc for it to send an accurate signal, which is why some owners find that repairing or replacing their brake pads will solve their problem while others are still having trouble even after installing new sensors.
Creates an Open Circuit
If one of these sensors does not have enough power (due to the low current passing through it), then it will create an open circuit and won’t be able to send signals correctly, resulting in faulty brakes once again.
How to replace Brake Sensors of Mercedes
If you’re having problems with your braking system, it’s likely that the brake sensor is causing the issue.
This small device monitors how hard your brakes are applied and sends a signal to the car’s computer. If something is wrong with the sensor, it will send inaccurate signals to the computer.
If you are driving a Mercedes and notice that the brakes don’t work properly, it is likely that your brake sensor needs to be replaced. This guide will show you how to do this step by step.
To replace a brake sensor on a Mercedes-Benz, follow these steps:
- Disconnect the negative battery cable.
- Remove the Brake Pedal Assembly (1).
- Slide the Sensor Shield away from the sensor body and disconnect it from both wiring harnesses (2, 3).
- Remove the brake sensor by removing 4 screws and securing it to its bracket on the front wheel hub using a Phillips head screwdriver.
If your car has an ABS system, also remove 2nd brake caliper piston assembly at this time as well- Refer to your Mercedes Owners Manual for more detailed instructions if applicable. Disconnect ABS Sensor & Relay Module
- Next up is disconnecting either/both ABS sensors as well as any relay modules that may be installed beneath your car’s chassis (look for small black boxes next to each sensor – if these boxes cannot be easily accessed then pop them out using a Phillips head screwdriver once they’re unplugged).
- It is always recommended practice when working on cars never ever allow wires and cables to touch hot engine oil.
Maintenance of Mercedes Brake Pad Sensors
Brake pads are a vital component of your car’s safety system, so it is important to keep them in good condition.
Brake pad sensors can help you do just that by warning you when the brakes need to be applied. If your brake pads are worn down or have missing pieces, they may not work as well as they should and could lead to an accident.
To maintain sensor accuracy and extend the life of your braking system, replace them according to manufacturer guidelines every time they’re due for service or whenever there’s evidence of wear or tear on the surface area where the sensor sits.
The brake pad sensors on a Mercedes are important because they help the car stop. If they’re not maintained correctly, they can fail and cause the brakes to malfunction or even fail completely.
Brake Pad Sensor Replacement
If you have a Mercedes vehicle, it is important to regularly inspect and replace the brake pad sensors. This will ensure that your car’s braking system functions properly and reduces the risk of accidents.
Faulty Sensors Cause Reduced Stopping Power
A faulty sensor can cause reduced stopping power on your Mercedes car, which may lead to an increase in accidents.
If you experience decreased stopping power, it is important to take your car into a mechanic for inspection as soon as possible.
Ineffective Breaks Result in Premature Losing Pressure from Brakes
If brakes are not effective or if they lose pressure too quickly, this can create dangerous situations for drivers behind you who may not be able to stop in time if there was an accident ahead of them.
It is important to have regular inspections performed on all of your Mercedes brake pads so that any problems with the braking system can be detected early on and corrected before they become serious issues.
Over Time, Brake Pads Wear Down
Affecting Performance and Safety Brakes need periodic maintenance in order to keep them working effectively and reduce the risk of accidents, but over time brake pads will wear down causing performance issues and even safety hazards when driving at high speeds or during emergencies.
FAQs
How Many Brake Pad Sensors Does a Mercedes Have?
A Mercedes has two brake pads, one is on the front side and the other one is on the passenger side.
Do Mercedes Brakes Have Sensors?
Yes, Mercedes brakes are equipped with sensors that provide feedback to the driver about how well they are braking.
What Is a Brake Pad Wear Sensor?
A brake pad wear sensor is a device that can detect when the brake pads on your car are worn down to the point where they need to be replaced.
Can You Reuse Brake Pad Sensors?
Brake pads can be reused, but it is important to clean them and replace the pads if they wear out.
How Much Does It Cost to Replace a Brake Sensor?
Depending on the type of vehicle, these replacement parts can cost anywhere from $100 to $500 or more.
Final Words
Brake sensors of a Mercedes are designed to detect when the car’s brakes are applied. The sensor sends a signal to the computer, which then activates the airbags and other safety features in case of an accident.
The brake sensor is a small device that detects when the brake pedal has been depressed and sends a signal to the car’s computer.
The brake sensor works by detecting changes in voltage that occur when pressure is applied to it. It also uses an electromagnetic field to measure the distance from itself.
