How to Change Rotors on Dodge Ram 1500?

Changing your Dodge Ram 1500’s rotors is a necessary step in maintaining its safety and preventing accidents. There are different types of rotors that can be used on this vehicle, so it’s important to make the right choice for your needs. 

The process of changing the rotors is simple and takes just a few minutes to complete. Keep in mind that you should have your car serviced at least once per year, so make sure to change your rotors as well.

Rotors on Dodge Ram 1500

Dodge Ram 1500 trucks is a common issue that requires attention. To avoid any accidents and costly repairs, it’s important to know when your truck needs rotors replaced. 

There are several factors to consider before choosing the right rotor for your truck, including make and model year When in doubt, always consult with a mechanic or dealership specifically trained in replacing Dodge Ram 1500 rotors.

Rotor installation can be done by yourself if you have basic mechanical skills – but it’s best to get help from a qualified technician Keep an eye out for warning lights on your dashboard that may indicate problems with the brakes – don’t ignore them. 

Dodge Ram 1500

If you suspect something is wrong with your brakes and cannot fix the issue on your own, take them into a professional garage as soon as possible. 

And lastly, remember that regular brake maintenance goes a long way in ensuring safety during winter weather conditions.

How to Change Rotors on Dodge Ram 1500

If your Dodge Ram 1500 is having trouble stopping on a hard surface, it might be time to change the rotors. This guide will show you how to do it step by step.

Disconnect Negative Cable

Make sure to disconnect the negative battery cable before beginning any rotor replacement work on your Dodge Ram 1500. This will prevent accidental damage to your engine and transmission while you’re working on your vehicle.

Disconnect Negative Cable

Remove Both Wheels from the Vehicle

Be sure to remove both of the wheels from the car in order for you to have easier access to the rotors and bearings.

Remove Both Wheels from the Vehicle

Remove Bolts

Remove all of the bolts that hold on each rotor assembly, making sure not to lose them during the removal process. 

If there are any spacers or washers between each bearing and rotor, be sure to keep these items as well as they may come in handy later on when replacing either component.

Remove Bolts

Remove Old Rotor

Next, take off old rotor by removing four bolts that secure it into place within its hub (two per side). Be careful not to damage newly installed brake pads during this step. 

Once removed, make note of how many teeth are left on each blade so that a new one can be accurately replaced later on if necessary.

Remove Old Rotor

Install New Rotor in Reverse Order

The first step is to install the new rotor in reverse order, which means that you will start by installing the hub cap and then working your way around to the rear of the vehicle. Make sure that all bolts are tightened before moving on to the next step.

Install New Rotor in Reverse Order

Reinstall Cables & Tighten Bolts

Once you have installed the new rotor, it is time to reinstall cables and tighten any bolts that were loosened when replacing the rotors. Finally, put wheels back on and attach brake pads if needed.

Put Wheels Back On

When putting wheels back on, be sure to use a torque wrench or pliers so that all nuts and bolts are tightened properly. This will ensure proper braking performance for years to come.

Put Wheels Back On

Attach New Brake Rotor

To attach the new brake rotor, first, take off the old one by unscrewing it from the wheel hub. Make sure to use a torque wrench to tighten or loosen the bolts evenly so that there is no stress on any of the other parts in the system. 

If you have an automatic transmission, be sure to remove and discard the ABS sensor before proceeding.

Attach New Brake Rotor

Test Drive to Check Out the New Rotors

Once your new brake rotor is attached, drive your Dodge Ram 1500 around for a bit to make sure everything works as it should before putting it away for good. 

Use caution when driving at high speeds – if something seems out of place, bring your truck back into our shop immediately.

Test Drive to Check Out the New Rotors

FAQs

How Much Are Rotors for a Dodge Ram 1500?

The rotors for a Dodge Ram 1500 will cost between $64.70 and $444.99.

How Long Do Ram 1500 Rotors Last?

Based on the manufacturer’s stated lifetime, it is likely that the rotor will last 80,000 miles or more on a Ram 1500.

Can You Drive with Bad Rotors?

Yes, you can drive with rotors that are bad. However, doing so may increase your risk of getting into a car accident.

Do Pads and Rotors Need to Be Replaced Together?

It is generally recommended that pads and rotors be replaced together, as this will ensure that the rotor is properly serviced and that the pads are replaced in a consistent and uniform manner.

How to Change Rotors on Chrysler 300

To change rotors on Chrysler 300, follow these steps:

  1. Remove the wheel.
  2. Remove the rotor from the hub.
  3. Install the new rotor in the hub. 

To Recap

Changing the rotors on a Dodge Ram 1500 can be done by following these easy steps: Be sure to have all of your tools and supplies ready before starting, including a jack, ramps, and lug wrench. 

Remove the wheel hubcap to gain easier access to the rotor bolts. Loosen each bolt, in turn, using a lug wrench until it’s loose enough to rotate the rotor around its axle (do not overtighten.). 

Replace the now-rotated rotor with a new one and tighten all bolts sequentially and securely once again using your lug wrench. Snapback onto hubcap and replace wheel hub. 

Note that if you experience any issues while performing this repair, such as vibration or abnormal noise from your vehicle, please bring it in to an authorized Dodge dealer for inspection and possible service work.

Leave a Comment