How to Change Tektro Auriga Brake Pads?

Tektro Auriga brakes are a popular choice for mountain bikers and other cyclists, as they provide excellent stopping power and modulation. 

When your brake pads begin to wear down, it’s important to replace them as soon as possible in order to maintain optimum braking performance. 

Replacing the Tektro Auriga brake pads is a relatively easy process that can be done by anyone with basic mechanical skills and a Phillips head screwdriver.

Make sure you have all of the necessary tools before beginning; including the correct size screwdriver, grease, wrench, and pad removal tool.

Brake Pads Used on Tektro Auriga

Tektro Auriga brake pads are a great choice for riders who need good stopping power and durability. They come in different types to suit different riding styles, and they’re compatible with most bike frames. 

You can find them at most bike shops or online retailers, depending on your location. Make sure to read the product description carefully before making a purchase to ensure you get the right pad for your bike and needs. 

Brake Pads Used on Tektro Auriga

The best time to replace your brake pads is when they start showing signs of wear or damage, so keep an eye out.

How to Change Tektro Auriga Brake Pads

Changing brake pads on your Tektro Auriga can be a tricky job, but with the right tools and instructions, it can be done quickly and easily. 

In this guide, we will show you how to remove the old pads, install the new ones, and clean up any residual adhesive.

How to Change Tektro Auriga Brake Pads

Locate the Tektro Auriga brake pads

To change your Tektro Auriga brake pads, you will first need to locate them. The Tektro Auriga brake pads can be found on either side of the bike’s rear wheel. Pry off the old brake pad and slide in the new one. 

Make sure that you line up the notches on both sides of each pad correctly before securing it with screws or bolts.

Locate the Tektro Auriga brake pads

Remove any existing fluid from the calipers

Before you begin working on your brakes, make sure to remove any existing fluid from the calipers using a syringe or an appropriate container. 

This will make it easier to work with and clean after surgery is complete. You should also use a degreaser if necessary to break down any built-up residue within the calipers themselves.

Remove any existing fluid from the calipers

Remove the Wheels

The first step is to remove the wheels. You’ll need a wrench or socket to unscrew the bolts that hold them on. Once they’re off, you can lift them out of the way.

Remove the Wheels

Remove the Slider Bolts

Next, you’ll need to remove the slider bolts which are located on either side of each wheel hub. Use a wrench or socket and twist until they come loose.

Remove the Slider Bolts

Pivot the Brake Caliper Up

Now you will need to pivot up your brake caliper so it’s sitting flat against its bracket (it should look like an “L”). Be careful not to damage it in any way during this process.

Slide Out Old Brake Pads

Once your caliper is up, you can slide out your old pads by gently pushing down on one edge and pulling them back towards you. Make sure not to lose any of these pieces – they’re important for later.

Slide Out Old Brake Pads

Slide-In New Brake Pads

Next, place your new pads into position over top of the old ones. Push down firmly onto both edges so that they fit snugly into their grooves in the caliper and then screw everything back together using those same slider bolts. 

Again, be careful not to damage anything along the way. Finally test-drive your car before putting things away for good.

Slide-In New Brake Pads

Retract the Pistons

To safely remove the brake pads, you first need to retract the pistons by turning them clockwise with a wrench. 

This will allow you to access and remove the pads without any danger of hitting anything else in your car.

Retract the Pistons

Finally Test-Drive

Once you have removed the old pads, it is time to finally test-drive your vehicle so that everything works as it should. 

Make sure all brakes work properly before reattaching the new pads.

How to Know That Tektro Auriga Brake Pads Need to Be Changed

If you’re noticing that your Tektro Auriga brake pads are starting to wear down quickly, it’s time to change them. Brake pads should be replaced every 3-4 years or when they start showing signs of wear and tear. 

To check if the pads need to be changed, simply press down on the pedal with your foot firmly planted on the ground and watch for how long it takes for the pad to stop making noise. 

If it’s wearing down too quickly, it may be time for a replacement.

Brake pad noise

Brake pad noise is another sign that you may need to replace your Tektro Auriga brake pads. 

When the pads make too much noise when you’re braking, it means they are starting to wear down and need to be replaced sooner rather than later. Too much noise also cause overheated brake pad, which is unusual.

Brakes feel spongy

When your brakes don’t respond well, they may feel spongy or soft. This means that the brake pads have lost their ability to stop the vehicle effectively. 

You may also see bubbles or fluid coming from your calipers.

Brakes don’t respond well

If you notice that your brakes don’t always work as well as they should, it might be time to change them out. 

When this happens, the pads will not grip the wheel as tightly and this can lead to a loss of braking power in rainy or snowy conditions.

See bubbles or fluid coming from your calipers

Bubbles and fluid are often indicative of a problem with your brake system and should be checked out by a mechanic as soon as possible. 

If these signs are present, it is likely that there is something wrong with either the master cylinder or one of the caliper pistons which needs replacement.

The brake pedal feels mushy or soft

If the brake pedal feels mushy or soft, it may be time to change your Tektro Auriga brake pads. 

This problem can usually be solved by replacing the pads and doing a standard inspection of the brakes.

FAQs

Do All Tektro Brakes Use the Same Pads?

Most Tektro brakes use the same pads. However, there are some models that use different pads, depending on the type of brake.

Are Tektro Auriga Brakes Good?

The Tektro Auriga brakes are a good option for those who are looking for a reliable set of brakes. They offer good stopping power and are easy to use.

Do Shimano Brake Pads Fit Tektro Brakes?

The Shimano brake pads should fit Tektro brakes, as Shimano is a subsidiary of Tektro. 

Where Are Tektro Brakes Made?

Tektro brakes are made in Taiwan and China.

Who Is Tektro Owned By?

Tektro is owned by three friends- Gary Chen, Leo Chen, and Aver Tsai.

To Recap

Tektro Auriga brake pads are a great way to upgrade your car’s braking performance and lifespan. You can install them yourself or take them to a local mechanic for installation, depending on your skill level. 

Be sure to read the instructions carefully before you start so that you don’t damage your vehicle or yourself in the process. 

If you have any questions about installing Tektro Auriga brake pads, feel free to comment in the comment box.

Leave a Comment