Brake pads require regular lubrication to prevent wear and tear. Some brake fluids are designed specifically for use on pads, while others can be used on other metal parts of your car as well.
To lubricate the brakes, apply a small amount of fluid to each pad and work it in with your fingers or a cloth rag. Don’t overdo it – too much grease will only make the problem worse.
If you notice any sticking or stopping when braking, it’s time to give the brakes a good cleaning and some fresh lube before continuing use.
Lubricating the brake pads every month or two should keep them performing optimally for years to come.
Contents
How to Lubricate Brake Pads -Step by Step Guideline
If you’re having trouble with your car stopping suddenly, it may be due to dry or worn brake pads. To fix the problem, you’ll need to lubricate the pads.
Here’s a step-by-step guide on how to do it:
Remove Brake Pedal
To lubricate brake pads, you will need to remove the pedal from the car.
Loosen Lug Nuts
There are four lug nuts on each side of the axle; use a wrench to loosen them until they can be easily removed.
Remove Brake Pad Retaining Rings and Bolts
On some models, there are also bolts that hold the brake pad retaining rings in place – these should also be loosened with a wrench using care not to damage them.
If your vehicle has dual-piston calipers, you may also have to remove both pads at once in order for this step to work correctly.
Inspect Brake Pad for Damage
Before you can lubricate the brake pads, you must first inspect them for damage.
This is a critical step in order to ensure that the pads are properly lubricated and do not cause any further problems with your car’s braking system.
Remove Brake Pads from Vehicle
Once you have inspected the brakes, it is time to remove them from the vehicle.
Be sure to use caution when doing this as any improper movement or contact with the brake calipers could result in costly repairs later on down the road.
Lubricate Brake Pads using an Appropriate Lube
After removing the pads, it is now time to apply an appropriate amount of lube to them using a grease gun or spray bottle.
Make sure that you select a lube that will protect both your discs and rotors while providing adequate performance and stopping power when needed most.
Install Brake Pads Back onto
Vehicle Once you have applied enough lube to prevent sticking, it is time to install the pads back onto their respective calipers using torque wrenches or special installation tools designed specifically for this purpose.
Common Maintenance Tips on Brake Pads
To keep your brakes in good condition, make sure to perform the following maintenance tips:
Regularly inspect brake pads for wear and tear
Brake pads are a vital part of your car’s braking system, but they need to be maintained in order to function properly.
Over time, brake pads will wear down and become less effective at stopping the car and gets wrapped.
This can result in decreased braking distances, increased pedal pressure required to stop the vehicle, and even possible bluing or rusting of the brakes.
Change brake pads when they show signs of wear
When you notice that your brake pads are starting to show signs of wear (e.g., becoming soft), it is important to replace them as soon as possible in order to maintain optimal performance and safety on the road.
Brake pad replacement intervals vary depending on the make and model of the car, but generally speaking, they should be replaced every two years.
Check fluid level and condition regularly
It is important to check the fluid level in your brakes regularly – especially if there has been any recent driving in wet weather conditions.
Because moisture can cause corrosion inside the braking system components which may then lead to poor performance or failure altogether.
FAQs
How Much Do Brake Pads Usually Cost to Replace?
The average cost to replace brake pads on a car is between $150 per axle.
How Often Should You Change Your Brake Pads?
Generally, brake pads should be replaced every 30,000-35,000 miles, though this frequency may vary depending on the type of driving you to do.
How Long Can You Drive on Worn Brake Pads?
If the brake pads are severely worn, they may not be able to stop the car completely. In this case, you would need to replace the pads as soon as possible.
How Long Does It Take to Change Brakes?
It usually takes around fifteen minutes to eight hours for the brake rotors to be replaced.
Do Brake Pads Come in Pairs?
Yes, usually, brake pads come in pairs.
To Recap
If your brake pads are feeling dry and gritty, you may need to lubricate them. There are a variety of products on the market that can do this task for you.
Make sure to read the ingredients before purchasing any type of lubricant to avoid harmful chemicals or contaminants.
Apply the product thoroughly to both sides of each pad, making sure it reaches all the way down into the grooves in the metal surface.
Allow it to sit for at least 30 minutes so that it has time to work its magic Be cautious not over-lubricate as this can actually cause problems and increase braking distances.
